You’ve followed a link to a topic that doesn’t exist yet.
If permissions allow (as a AW Member, you may edit River Wiki, for example) you may create it by using the “Create This Page Button” below by hovering your mouse over the edit wrench.
If you don’t see a wrench, you don’t have permission to edit or edit is turned off.
If you don’t know what you are doing click on the sandbox and instructions link off the create page link.
User Comments |
|
2004-09-08 15:56:18 (1430 days ago)
Boyd Ruppelt
typically, as Tom K. mentioned, Old Mill Falls is split into 3 parts: <br />
1. The main line on river left (anywhere...but good boof center or far right) <br />
2. Sidewinder Falls, the little waterfall pouring into the sluice. <br />
3. A line called "Reverse HammerFactor"... it's like a mirror line of HammerFactor on the Green River Narrows....but a LOT smaller. The problem is the seriously undercut r. right shelf and the potholes and caves in the river left wall that the ledge pours into. The line isn't difficult...but it's easy to slide off the angled shelf into the hole to soon...and/or pitton into a deep pothole/cave. It's a fun line to try if you've got the skills and proper bank support. ;-)
|
|
2004-09-06 17:06:11 (1432 days ago)
tom kaylor
This about the upper two sections of the Bear Creek Floatway. <br />
This a class I (VI) stream that runs weekends all summer thanks to TVA<br />
recreational releases.<br />
It's located in NW AL and is a great training stream and students get to<br />
paddle Old Mill Falls which has several lines ranging from II to III in the<br />
upper section. The left side is kind of creeky and can be boofed in the<br />
center while the right side is an easy slide to a 2' drop. There is also an<br />
angled slot that has been run successfully but has a treacherous hole if you<br />
don't hit your line just right.<br />
There is alot of flatwater in the lower section broken up by a few class I<br />
drops. A large rock outcropping is a great place for lunch and to watch<br />
people surfing a very nice class II surfing wave. You can also use this as a<br />
"jump rock" for seal launches as it sits about 6' over a deep pool.<br />
200 yards downstream the entire river funnels into the left side and drops<br />
vertically about 20' into a boulder jumble. (VI) Mandatory portage! The<br />
runout at the base of Factory Falls has some very busy aereated water that<br />
is not easy to enter due to the size of the narrow channel. There is an<br />
opportunity here for stern squirts, enders and loops if you dare, the hole<br />
at bottom may slam you into a rock on river left at higher levels<br />
It's in a scenic gorge so if you catch in the winter you will get to see<br />
alot of high bluffs and waterfalls as your paddling the 4-5 miles of<br />
flatwater to the takeout.<br />
Many who have paddled it refer to it as the "Alabama Death Paddle" but<br />
everytime we schedule a trip we have no trouble filling it. It's a favorite<br />
for novice / newbie paddlers.<br />
It's nine miles long but the actual whitewater totals only 1/4 mile. You can<br />
eliminate 2 miles but you miss Old Mill Falls.<br />
TVA releases 210 CFS but is more fun around 300 CFS. I think I have paddled<br />
it at 450 CFS but some features start to wash out.<br />
Not a bad day trip from Memphis, Huntsville, Birmingham, etc.<br />
|